Flow divitor/ combiners
These valves split the flow coming from one line, to 2 flows equal or proportional to each other. The percentage by which the exit flows are split is function of the valve internal holes diameter, therefore the flow split is not adjustable.
Usually this valve is utilized in the following situations:
- two actuators (with the same dimensions, supplied by the same pump, controlled by the same directional valve, without a rigid link between them) have to move in and out simultaneously, each one without being affected by the load operating on the other one
- for the synchronized exit motion of two linear actuators linked to the same load (for example load platforms, scaffolds, etc.)
CODE
Description
Max press.
Body material
Connections
L/min
Click to enlarge image
A140300.21.00
A140300.22.00
A140300.23.00
A140300.24.00
A140300.25.00
A140300.26.00
Flow divitor/ combiner
max error 1.5%
Zinc plated steel
400 Bar
in G3/8" out G3/8"
in G1/2" out G3/8"
3-6
6-10
10-20
20-32
32-40
40-60
A140300.31.00
A140300.32.00
A140300.33.00
A140300.34.00
A140300.35.00
Flow divitor/ combiner
max error 3%
Zinc plated steel
400 Bar
G3/8"
3-6
6-10
10-20
20-32
32-40
A140400.01.00
Flow divitor/ combiner
max error 3%
Aluminum
250 Bar
in G3/4" out G1/2"
50-95
A140600.01.00
A140600.02.00
Flow divitor/ combiner
max error 3%
Zinc plated steel
400 Bar
in G1" out G3/4"
90-150
50-95
C141701.01.00
C141701.02.00
C141701.03.00
C141701.04.00
C141701.05.00
C141701.06.00
Flow divitor/ combiner cartridge
210 Bar
7lpm
15lpm
22lpm
30lpm
38lpm
45lpm
C149600.01.00
C149600.02.00
Flow divitor/ combiner cartridge
240 Bar
60lpm
90lpm
COPYRIGHT HBS SRL sales@hbsvalves.com